| Page Number | Problem Number | Title | Paper Size | Scale | Units | Dimensions | Type | Other Instructions |
| Multiviews | ||||||||
| 151 | 17, 20, 22, 23 | None | A | None | None | None | Sketch | Three views of each problem, 4 per sheet |
| 153 | 16, 18,22, 23 | None | A | None | None | None | Sketch | Three views of each problem, 4 per sheet |
| 154 | 17, 20, 22, 29, 31 | None | A | None | None | None | Sketch | Three views of each problem, 4 per sheet |
| 190 | 6.56 | Rod Support | A | 1=1 | Inches | Yes | Instruments | Three views |
| 191 | 6.62 | Cam | B | 1=1 | Inches | Yes | CAD | Three views, add isometric to scale above right-side view |
| 191 | 6.65 | Support | B | 1=1 | Metric | Yes | CAD | Three views, add isometric to scale above right-side view |
| 196 | 6.90 | Door Bearing | B | 1=1 | Inches | Yes | CAD | Three views |
| 196 | 6.94 | Holder | B | 1=1 | Inches | Yes | CAD | Three views |
| Sections | ||||||||
| 223 | 1 through 10, 13, 14 | None | A | None | None | None | Sketches | Two views (shown) plus the section, 4 problems per page |
| 224 | 7.40 | Bearing | A | 1=1 | Inches | Yes | Instruments | Front view and full section |
| 224 | 7.42 | Column Support | B | 1=1 | Metric | Yes | CAD | Front view and full section |
| 225 | 7.50 | Pulley | B | 1=1 | Metric | Yes | CAD | Front view and full section |
| Auxiliaries | ||||||||
| 248 | 1 through 8 | None | A | None | None | None | Sketches | Sketch front and right side then add the auxiliary view |
| 249 | 8.30 | Anchor Bracket | B | 1=1 | Metric | Yes | CAD | Three views plus a partial auxiliary view |
| 249 | 8.33 | Guide Block | B | 1=1 | Metric | Yes | CAD | Three views plus auxiliary |
| Surface Intersections | ||||||||
| 610 | 19.30: 2, 3, 6 | None | A | 1=1 | Metric | None | CAD | Draw and build the developments |
| 610 | 19.32: 1, 3, 5, 6 | None | A | 1=1 | Metric | None | CAD | Draw and build the developments |
| 612 | 19:.36: 1, 7 | None | A | 1=1 | Metric | None | CAD | Draw and build the developments |
| Architectural | ||||||||
| None | None | House Section | B | 3/4” = 1'-0” | Inches | Yes | CAD | Copy the Handout |
| None | None | 2nd Floor House Plan | C | 1/4” = 1”-0” | Inches | Yes | Instruments | 2 bedroom, one bath addition to existing house plan |
| None | None | House Elevation | C | 1/4” = 1”-0” | Inches | Yes | CAD | See sample drawings |